图片名称

0755 8148 3343

产品展示
万兆单模双纤10KM 1310波长
+
  • 万兆单模双纤10KM 1310波长

万兆单模双纤10KM 1310波长

JHA3910D is a very compact 10Gb/s optical transceiver module for serial optical communication applications at 10Gb/s. The JHA3910D converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.
联系我们
返回列表
  • 产品描述
  • 产品特征
  • 技术参数
  • 尺寸图
  • 订购信息

  • JHA3910D is a very compact 10Gb/s optical transceiver module for serial optical communication applications at 10Gb/s. The JHA3910D converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with SFI specification.

    The high performance 1310nm DFB transmitter and high sensitivity PIN receiver provide superior performance for Ethernet applications at up to 10km links

    The SFP+ Module compliants with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.

    The fully SFP compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.

  •  Features:                                              

    ² Supports 9.95 to 11.3Gb/s bit rates

    ² Hot-Pluggable

    ² Duplex LC connector

    ² 1310nm DFB transmitter, PIN photo-detector

    ² SMF links up to 10km

    ² 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface

    ² Power Supply :+3.3V

    ² Power consumption<1.5W

    ² Temperature Range: 0~ 70°C

    ² RoHS compliant

     

    Applications:

    ² 10GBASE-LR/LW Ethernet

    ² SONET OC-192 / SDH

    ² 10G Fibre Channel

  • Absolute Maximum Ratings

     

    Parameter

    Symbol

    Min.

    Typical

    Max.

    Unit

    Storage Temperature

    TS

    -40

     

    +85

    °C

    Case Operating Temperature

    TA

    0

     

    70

    °C

    Maximum Supply Voltage

    Vcc

    -0.5

     

    4

    V

    Relative Humidity

    RH

    0

     

    85

    %

    Electrical Characteristics (TOP = 0 to 70 °C, VCC = 3.135 to 3.465 Volts)

     

    Parameter

    Symbol

    Min.

    Typical

    Max.

    Unit

    Note

    Supply Voltage

    Vcc

    3.135

     

    3.465

    V

     

    Supply Current

    Icc

     

     

    430

    mA

     

    Power Consumption

    P

     

     

    1.5

    W

     

    Transmitter Section:

    Input differential impedance

    Rin

     

    100

     

    Ω

    1

    Tx Input Single Ended DC Voltage Tolerance (Ref VeeT)

    V

    -0.3

     

    4

    V

     

    Differential input voltage swing

    Vin,pp

    180

     

    700

    mV

    2

    Transmit Disable Voltage

    VD

    2

     

    Vcc

    V

    3

    Transmit Enable Voltage

    VEN

    Vee

     

    Vee+0.8

    V

     

    Receiver Section:

    Single Ended Output Voltage Tolerance

    V

    -0.3

     

    4

    V

     

    Rx Output Diff Voltage

    Vo

    300

     

    850

    mV

     

    Rx Output Rise and Fall Time

    Tr/Tf

    30

     

     

    ps

    4

    LOS Fault

    VLOS fault

    2

     

    VccHOST

    V

    5

    LOS Normal

    VLOS norm

    Vee

     

    Vee+0.8

    V

    5

    Note:

    1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

    2. Per SFF-8431 Rev 3.0

    3. Into 100 ohms differential termination.

    4. 20%～80%

    5. LOS is an open collector output. Should be pulled up with 4.7k – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.

    6. SONET OC-192 / SDH

    7. 10GBASE-LR/LW Ethernet

     

    Optical Parameters(TOP = 0 to 70°C, VCC = 3.135 to 3.465 Volts)

     

    Parameter

    Symbol

    Min.

    Typical

    Max.

    Unit

    Note

    Transmitter Section:

    Center Wavelength

    λt

    1290

    1310

    1330

    nm

     

    spectral width

    △λ

     

     

    1

    nm

     

    Average Optical Power

    Pavg

    -8.2

     

    0.5

    dBm

    1

    Optical Power OMA

    Poma

    -5.2

     

     

    dBm

     

    Laser Off Power

    Poff

     

     

    -30

    dBm

     

    Extinction Ratio

    ER

    3.5

     

     

    dB

    7

    Extinction Ratio

    ER

    6

     

     

    dB

    6

    Transmitter Dispersion Penalty

    TDP

     

     

    3.2

    dB

    2

    Relative Intensity Noise

    Rin

     

     

    -128

    dB/Hz

    3

    Optical Return Loss Tolerance

     

    20

     

     

    dB

     

    Receiver Section:

    Center Wavelength

    λr

    1260

     

    1355

    nm

     

    Receiver Sensitivity

    Sen

     

     

    -14.5

    dBm

    4,7

    Receiver Sensitivity

    Sen

     

     

    -14.5

    dBm

    4,6

    Stressed Sensitivity (OMA)

    SenST

     

     

    -10.3

    dBm

    4

    Los Assert

    LOSA

    -25

     

    -

    dBm

     

    Los Dessert

    LOSD

     

     

    -15

    dBm

     

    Los Hysteresis

    LOSH

    0.5

     

     

    dB

     

    Overload

    Sat

    0

     

     

    dBm

    5

    Receiver Reflectance

    Rrx

     

     

    -12

    dB

     

    Note:

    1. Average power figures are informative only, per IEEE802.3ae.

    2. TWDP figure requires the host board to be SFF-8431compliant. TWDP is calculated using the Matlab code provided in clause 68.6.6.2 of IEEE802.3ae.

    3. 12dB reflection.

    4. Conditions of stressed receiver tests per IEEE802.3ae. CSRS testing requires the host board to be SFF-8431 compliant.

    5. Receiver overload specified in OMA and under the worst comprehensive stressed condition.

    6. SONET OC-192 / SDH

    7. 
    10GBASE-LR/LW Ethernet

     

    Timing Characteristics

     

    Parameter

    Symbol

    Min.

    Typical

    Max.

    Unit

    TX_Disable Assert Time

    t_off

     

     

    10

    us

    TX_Disable Negate Time

    t_on

     

     

    1

    ms

    Time to Initialize Include Reset of TX_FAULT

    t_int

     

     

    300

    ms

    TX_FAULT from Fault to Assertion

    t_fault

     

     

    100

    us

    TX_Disable Time to Start Reset

    t_reset

    10

     

     

    us

    Receiver Loss of Signal Assert Time

    TA,RX_LOS

     

     

    100

    us

    Receiver Loss of Signal Deassert Time

    Td,RX_LOS

     

     

    100

    us

    Rate-Select Chage Time

    t_ratesel

     

     

    10

    us

    Serial ID Clock Time

    t_serial-clock

     

     

    100

    kHz

     

    Pin Assignment

     

    Diagram of Host Board Connector Block Pin Numbers and Name

     

    Pin Function Definitions

     

    PIN #

    Name

    Function

    Notes

    1

    VeeT

    Module transmitter ground

    1

    2

    Tx Fault

    Module transmitter fault

    2

    3

    Tx Disable

    Transmitter Disable; Turns off transmitter laser output

    3

    4

    SDL

    2 wire serial interface data input/output (SDA)

     

    5

    SCL

    2 wire serial interface clock input (SCL)

     

    6

    MOD-ABS

    Module Absent, connect to VeeR or VeeT in the module

    2

    7

    RS0

    Rate select0, optionally control SFP+ receiver. When high, input data rate >4.5Gb/ s; when low, input data rate <=4.5Gb/s

     

    8

    LOS

    Receiver Loss of Signal Indication

    4

    9

    RS1

    Rate select0, optionally control SFP+ transmitter. When high, input data rate >4.5Gb/s; when low, input data rate <=4.5Gb/s

     

    10

    VeeR

    Module receiver ground

    1

    11

    VeeR

    Module receiver ground

    1

    12

    RD-

    Receiver inverted data out put

     

    13

    RD+

    Receiver non-inverted data out put

     

    14

    VeeR

    Module receiver ground

    1

    15

    VccR

    Module receiver 3.3V supply

     

    16

    VccT

    Module transmitter 3.3V supply

     

    17

    VeeT

    Module transmitter ground

    1

    18

    TD+

    Transmitter inverted data out put

     

    19

    TD-

    Transmitter non-inverted data out put

     

    20

    VeeT

    Module transmitter ground

    1

    Note:

    1. The module ground pins shall be isolated from the module case.

    2. This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board.

    3. This pin shall be pulled up with 4.7K-10Kohms to VccT in the module.

    4. This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board. 

     

    SFP Module EEPROM Information and Management

    The SFP modules implement the 2-wire serial communication protocol as defined in the SFP -8472. The serial ID information of the SFP modules and Digital Diagnostic Monitor parameters can be accessed through the I2C interface at address A0h and A2h. The memory is mapped in Table 1. Detailed ID information (A0h) is listed in Table 2. And the DDM specification at address A2h. For more details of the memory map and byte definitions, please refer to the SFF-8472, “Digital Diagnostic Monitoring Interface for Optical Transceivers”. The DDM parameters have been internally calibrated.

     

     

    Table 1. Digital Diagnostic Memory Map (Specific Data Field Descriptions)

     

    Table 2 - EEPROM Serial ID Memory Contents (A0h)

     

    Data Address

    Length

    (Byte)

    Name of

    Length

    Description and Contents

    Base ID Fields

    0

    1

    Identifier

    Type of Serial transceiver (03h=SFP)

    1

    1

    Reserved

    Extended identifier of type serial transceiver (04h)

    2

    1

    Connector

    Code of optical connector type (07=LC)

    3-10

    8

    Transceiver

    10G Base-LR

    11

    1

    Encoding

    64B/66B

    12

    1

    BR, Nominal

    Nominal baud rate, unit of 100Mbps

    13-14

    2

    Reserved

    (0000h)

    15

    1

    Length(9um)

    Link length supported for 9/125um fiber, units of 100m

    16

    1

    Length(50um)

    Link length supported for 50/125um fiber, units of 10m

    17

    1

    Length(62.5um)

    Link length supported for 62.5/125um fiber, units of 10m

    18

    1

    Length(Copper)

    Link length supported for copper, units of meters

    19

    1

    Reserved

     

    20-35

    16

    Vendor Name

    SFP vendor name: JHA

    36

    1

    Reserved

     

    37-39

    3

    Vendor OUI

    SFP transceiver vendor OUI ID

    40-55

    16

    Vendor PN

    Part Number: “JHA3910D” (ASCII)

    56-59

    4

    Vendor rev

    Revision level for part number

    60-62

    3

    Reserved

     

    63

    1

    CCID

    Least significant byte of sum of data in address 0-62

    Extended ID Fields

    64-65

    2

    Option

    Indicates which optical SFP signals are implemented

    (001Ah = LOS, TX_FAULT, TX_DISABLE all supported)

    66

    1

    BR, max

    Upper bit rate margin, units of %

    67

    1

    BR, min

    Lower bit rate margin, units of %

    68-83

    16

    Vendor SN

    Serial number (ASCII)

    84-91

    8

    Date code

    JHA’s Manufacturing date code

    92-94

    3

    Reserved

     

    95

    1

    CCEX

    Check code for the extended ID Fields (addresses 64 to 94)

    Vendor Specific ID Fields

    96-127

    32

    Readable

    JHA specific date, read only

    128-255

    128

    Reserved

    Reserved for SFF-8079

    Digital Diagnostic Monitor Characteristics

     

    Data Address

    Parameter

    Accuracy

    Unit

    96-97

    Transceiver Internal Temperature

    ±3.0

    °C

    98-99

    VCC3 Internal Supply Voltage

    ±3.0

    %

    100-101

    Laser Bias Current

    ±10

    %

    102-103

    Tx Output Power

    ±3.0

    dB

    104-105

    Rx Input Power

    ±3.0

    dB

    Regulatory Compliance

     

    The JHA3910D complies with international Electromagnetic Compatibility (EMC) and international safety requirements and standards (see details in Table following). 

     

    Electrostatic Discharge

    (ESD) to the Electrical Pins

    MIL-STD-883E

    Method 3015.7

    Class 1(>1000 V)

    Electrostatic Discharge (ESD)

    to the Duplex LC Receptacle

    IEC 61000-4-2

    GR-1089-CORE

    Compatible with standards

    Electromagnetic

    Interference (EMI)

    FCC Part 15 Class B

    EN55022 Class B (CISPR 22B)

    VCCI Class B

    Compatible with standards

    Laser Eye Safety

    FDA 21CFR 1040.10 and 1040.11

    EN60950, EN (IEC) 60825-1,2

    Compatible with Class 1 laser

    product.

    Recommended Circuit

     

    Recommended Host Board Power Supply Circuit

     

    Recommended High-speed Interface Circuit

  • Mechanical Dimensions

  • JHA3910D

     10Gb/s 10km SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DFB-LD, Single mode

上一页

万兆单模双纤20KM 1310波长

万兆单模双纤2KM 1310波长

下一页